These DO NOT require you remove your passenger peg brackets as they angle up quite a bit
These slip on the existing head pipe.
Great for the cafe or brat look.
Contact us with any questions.
Can be used on CX or GL 500's and 650's
Can be trimmed up to 2-3 inches on the front and up to 6 inches on the back to allow for your personal selection of mufflers and exhaust style and length
Weld on to the joint ring at the header and you can slide any 1 3/4 muffler over the pipe at the back and clamp it on
You can fit your new mufflers to the stock foot peg bracket at the back or with the up-swept ones you may want to make your own bracket for the muffler