- Country of Manufacture:
The motoscope tiny is a very compact, analogue 49 mm (1.93”) speedometer.
The speed is digitally measured and precisely displayed via stepping motor and indicator.
The installation diameter of 49 mm (1.93”) and the installation depth of only 24 mm (1”) provide various installation options.
The sophisticated technology provides for a classic look without
compromise. The dial completely does without display sections or LCD and
has a convincing classical look. The ideal solution for purists and
The high quality
aluminum casing is machined from solid metal and its surface is anodized
black. The bezel is also available in 'anodized black' or 'mirror
polished'. The casing is 100% water-tight and resistant to vibrations.
Dial and display
The analogue dial in contrasting black and white is indirectly
illuminated by white LEDs. The innovative LED display is hidden behind
the black part of the dial and only visible through the dial while
operating, not when switched off!
The LED luminosity is automatically adjusted to achieve optimal readability in dark, sunlight and dawn conditions.
If the speed exceeds the 200 km/h (or 200 mph) on the analogue scale,
it is automatically displayed in the LED display. The maximum speed is
recorded as well
The 4 indicator lights (blue, red and 2 x green)
are also integrated into the dial. These lights are only visible when
You can toggle
between the different information on the LED display by operating the
supplied menu push-button or e.g. the headlight flasher push-button on
the handle bar.
Default value on the display is the time. If
needed, a short actuation of the push-button will display the values of
total distance, day trip, on-board voltage etc.
All functions are
easy to operate with the push-button, e.g. day trip, reset or the like.
Default settings or recorded values are of course stored even with the
power supply switched off.
The motoscope tiny is easy to install with the two M3 threaded holes on the back side.
There are various motogadget brackets available for installation. Refer to "Brackets".
Connection and sensors
The detailed installation and operating instructions (refer to
"Downloads") help with the connection of instrument even for users
without any previous experience in handling the vehicle's electrical
The supplied speedometer sensor in stainless steel is very
small (M5/23 mm) and therefore easy to hide. The sensor can be easily
installed on front or rear wheel with the connector cable (1.5 m
long). This allows for the easy conversion of an originally mechanical
speedometer drive on a motorbike.
The motoscope tiny is compatible
with various original speedometer sensors (dry reed contact and
proximity sensors) of the motorbike manufacturers. In this case, the
terminals have to be connected only and the mechanical sensor
installation will be completely obsolete.
An intelligent 'Teach
Function' allows for the easy calibration of the speedometer - even on
vehicles with transmission sensors, e.g. Harley-Davidson (TM).
Scope of Supply
Instrument with approx. 75 cm (29.5”) connector cable, mini
push-button, 2 removable fuses, 9 cable end connectors, speedometer
sensor (M5 x 0,5 fine-pitch thread, stainless steel, IP 68) with 150 cm
(59”)connector cable, 2 powerful neodymium mini magnets, 2 mounting
screws M3 with washer, 2 diodes for pairing of turn signals, detailed
installation and operating instructions.
Specifications and Features
- Mounting diameter: 49 mm
- Weight: approx. 96 g
- Mount: 2 x M3 threaded hole
- Power consumption, operating: approx. 200 mA (load dependent)
- Operating voltage: 9 V - 15 V
- Operating temperature: -20... +80 °C
Speedometer, analogue (indicator)
0 – 200 km/h or mph
Speedometer, numeric (LED display)
200 – 999 km/h or mph
0 – 999 km/h or mph
9 – 15 V
00:00 – 23:59
0 – 999.9 km or mi
Total distance (adjustable)
99999 km or mi max.
turn signal, high beam, neutral, hazard light
To make the installation of the motoscope tiny easier on newer (2004 and up) Harley-Davidson models with CAN Bus technology look at the motogadget m-CAN adapter
To connect the motoscope tiny to one of the newer Triumph Twin or Triple models with CAN Bus technology check out the m-TRI from motogadget in the m-gadget section. Choose your model and year.