Contact us at

 541 687 6400





QR Code generator





  Home > Turn Signals > Turn Signal Parts Bulbs >

LED Electronic Flasher Relay with flat terminals
LED Electronic Flasher Relay with flat terminals


 
Our Price: $19.95

Part #: 035-17-1435

Description
 
This LED Electronic Flasher Relay(EFR) is designed to replace your stock 2 or 3 pin flasher relay.  It's plug and play design will connect directly into your stock relay wire connector.  This relay is one piece design and is waterproof with no exposed pins.

This will control hyper flashing of your LED turn signals.

Electrical specs.
12v 0.05A-10A
This relay will fit the following bikes:

Honda: CBR1000RR, RC-51, CBR600F4i, CB919, ST1300, GL1500, CBR1100XX, CBR900RR, CBR929RR, CBR600F2, CBR600F3, CBR600F4, VTR1000R Super Hawk, VT600, VTX 1800C, VTX 1800R, VTX 1800S, VTX 1800T, VTX 1300C, VTX 1300R, VTX 1300S, VTX 1300T, 1300 Fury, 1300 Stateliner, VFR 2002-2008 models, Valkyrie 1997-2003(will require 1 load resistor for each rear signal only),   1988 Honda Hawk GT (NT650), CB700SC (Nighthawk S), 84 1200 Goldwing,  Shadow Phantom 2010

Kawasaki: ZX-10R, ZX-12R, ZX-6R(R) up to 2004, Z1000, ZXR1200(1100), ZZR1200, ZX1200, ZR-7, KZ750(1977-78 hard wire),  Vulcan 900 C (2008)

Suzuki:  DR650 (1996 - 2012), All late model GSXR's with 2 wire replaceable flasher relays are also compatible but reqiure a hard wire installation.  Splice the pos + and neg - wires into your relay harness.  The EFR is powered by the Red wire and the Black wire connects to the motorcycle.

KTM: 690R Enduro (2009)

Ducati: 996 - Hard Wire Installation

- Motorcycles Light Blue wire is to be connected to the EFR's Red wire

- Motorcycles Pink wire gets connected to the EFR's Black wire

- Motorcycles Black wire is not to be used

Yamaha: YZF-R1, YZF-R6, YZF600, FZ-1, FJR1300, MT-01 (02-07), V-Max (09-2012)

Yamaha: Roadstar & V-Star

- Motorcycles Brown wire is to be connected to the EFR's Red wire

- Motorcycles Brown/White Stripe wire gets connected to the EFR's Black wire

Universal Hard Wire Installation Instructions

If your OEM flasher relay is a 2 wire relay or a 3 wire relay(with a ground) you can replace it with our LED Electronic Flasher Relay.

- EFR Red wire to power source - ( ignition swiched positive 12V)

- EFR Black wire to you LED turn signals 

Although we try to keep this list current and complete, there are many more bikes that are plug & play compatible and hard wire compatible with our LED EFR's 


Browse for more products in the same category as this item:

Turn Signals > Turn Signal Parts Bulbs
TailLight
Turn Signals
}